Friday, November 23, 2012

Vogue 8854

Wow, it's not often I purchase a new pattern and actually get it sewn up in the same season in which it was released!  This is one of the Very Easy Vogue Patterns issued this late fall from VoguePatterns.  I've been looking for a couple hoodie patterns lately and I thought this one had interesting design lines with the offset placket opening.


For my test of the pattern, I selected a sweater knit recently purchased from FabricMart.  It was described as a poly/cotton blend heathered stripe knit in the colors of sable, cream and dark brown.  It is an interesting knit, with one side showing a flat knit with the stripes clearly delineated and the other side appearing more of a boucle texture.  I chose the boucle textured side as the "right" side for my project.  I've already thrown out the scraps of the fabric used for this top before thinking to snap a photo of the two sides, but here it is in another colorway where you can kind of see the difference between the two sides:



The size chart on the pattern envelope put me in a size XL (20-22) and the finished garment measurements printed on the pattern tissue, in addition to some flat-pattern measuring on my part, confirmed that XL was the size I wanted to make.  I didn't even need to make my standard increase at the biceps on the sleeve!  But I did shorten the sleeve pattern by about 1.5 inches.

I really wanted to make the version with the hood (after all, that's why I bought the pattern!), but my test fabric was only 2 yards and I just couldn't squeeze the hood piece on what I had. So I had to go with the collar version and the shorter back length of View B, with the front pocket.  By the time I finished the garment, however, I was more than happy that I had to use the collar instead of hood--this collar is fabulous!  My sweater knit was fairly substantial to begin with and I interfaced the collar piece, as the pattern instructs.  Thus, the resulting collar has a nice ability to stand up in a shapely way, but is not so stiff that it looks board-like.  It also is soft and malleable enough to be able to fold it down if I wish.  It's really fun to play with for different looks!  Also, the collar pattern piece is just a big rectangle, so it would be very simple to cut the collar to be a shorter height if you wanted.

Here's the finished top:


The photo looks like I got a little over-zealous with the iron, but this isn't noticeable on the garment in real life.

A closer look:





This pattern is quite simple to put together and did not take a lot of time to construct.  The most time consuming part is probably creating the front placket opening.  And, while the pattern instructions are actually quite good and seem reasonably clear, I did veer from their suggested procedure in two aspects.  The first variation I did was when making the front placket.  The instructions tell you to sew the two fronts together with a seam which goes from the hem up to the bottom of the placket.  Then you work on each of the two sides of the placket to finish the front.  I thought this sounded like kind of a PITA to have to work on one side of the placket while the other half of the front was attached and dangling off to the side.  So, after stay-stitching each inner corner of the plackets, I constructed them separately, then stitched and finished the center front seam.  This worked just fine for me and probably involved much less swearing.

The other spot where I veered from the instructions as written was with the sleeves.  The pattern instructs to stitch the body side seams and the underarm sleeve seams separately and then do a traditional set-in sleeve, stitched in the round.  I totally understood why the pattern instructs to set the sleeve this way--this is not a dropped shoulder, the armscye sits at the normal shoulder point and, therefore, the sleeve has a relatively high cap.  When inserting a regular sleeve with a normal-to-high sleeve cap, it usually is easier (and you typically get much better results) if you set in the sleeve more traditionally.  However, knowing that I was working with a knit (which can be a little more forgiving when easing), I chose to put the sleeve in flat after I sewed the shoulder seams and then stitch the underarm and side body seam in one long go from bottom hem to sleeve hem.  It worked fine.

An even closer look at the collar with button closure:


I used an elastic hair tie for the button loop.

All in all, I think this is a great pattern.  Pretty simple and quick to put together, and the instructions are pretty decent.  The fit is good--I can wear a long-sleeved T-shirt or turtleneck underneath it, but nothing heavier than that.  I like that it has a regular sleeve/shoulder, rather than a dropped shoulder line.  The collar is really fun to wear and feels cozy, especially if there's a little wind in the air.  I think it turned out really cute and I will be making at least one more before I put the pattern away (gotta have that hood!!).





15 comments:

  1. It looks great, Marcy! This one is on my short list.

    ReplyDelete
    Replies
    1. Thanks Shams! I think it's a great pattern and I can't wait to see what wonderful fabric you pick for your version!

      Delete
  2. Marcy, if the pattern envelope showed your view with the top buttoned and the collar folded down, I would already own it. As it is, I've just put it on my list. Great review, and I think that your variations on the pattern sewing instructions are a big improvement. Thanks so much.

    ReplyDelete
    Replies
    1. I forgot to ask... Do you think that this would work in Polar Fleece (100 wt, which is lightweight)?

      Delete
    2. Thank you Sandra, that is such a lovely compliment! And yes, I do think this would work wonderfully in a polar fleece. If you are going to wear it over other garments though, I would just want to be aware that some polar fleeces have more of a tendency to "grab" than others--depending on texture and weight--causing problems like uncomfortable bunching in the sleeves or the dreaded "velcro butt." You might keep that in mind.

      Delete
  3. That is a fabulous coat! Nice sewing!

    ReplyDelete
  4. I really like this jacket and have put it on my to do list - your version looks great.

    ReplyDelete
    Replies
    1. Please let me know how yours turns out--it's always to fun to see other people's takes on the same pattern.

      Delete
  5. I ordered this patterm during the last sale but when it arrived the envelope put me off a little, it is not the best drawing. I am glad you have made it up though, it looks great, and it might just be the incentive to give it a go next Autumn (it is Spring here). Thank you :)

    ReplyDelete
    Replies
    1. Debbie, I agree that it is so difficult to get inspired by the (often crappy) drawings on a pattern envelope. I hope you do give this one a go--it's a great top/jacket to be able to just throw on for when those evenings or mornings have that cool bite in the air.

      Delete
  6. I missed this one on release, yours is so much better than the pattern envelope. Great top and nice details too.

    ReplyDelete
  7. The pattern was on my list to buy. When I saw yours, I knew I had to have it. And I shamelessly am going to sew a copy of yours--the fabric was still available at Fabric Mart! I really enjoy your blog and always am inspired. Thank you!

    ReplyDelete
  8. That elastic hair tie idea is genius. And to think. I only came over to read your blog, so it would be popular enough to get Carolyn's quality Spam. ;)

    ReplyDelete
  9. I love your sense of style. I nominated you for an award on my blog. Play if you want, and if not, that is just fine.

    ReplyDelete